Gotech
Yotsaphat Saribut
Electrical Engineer, Electrical Commissioning, Electrical Inspector, Electrical Technician.
Banglamung
Summary
Primary objective is to continue career development in the field of inspection and quality control in line with Electric Task Seeking further challenges in a company, where I shall be able to make significant contributions and make use of my experiences, technical knowledge and skills gained from previous positions. Supportive Electric role with +8 years of experience. Trained in power tool use with knowledge of electrical equipment and deep commitment to job site safety. Expert in finishing tasks on time and under budget.
Overview
15
15
years of professional experience
9
9
Certifications
Work History
Electrical
Danieli Contruction International
05.2010 - 02.2011
- Supervise installation detail for Conduit, Cable Tray, Cable Ladder
- Supervise Cable Pulling and Cable Termination for cabinet Switchgear
- Completed complex electrical installations for commercial projects, ensuring timely project completion.
- Reduced downtime with proactive preventive maintenance measures for electrical controls components.
- Expedited project completion timelines through efficient prioritization and organization of electrical tasks.
- Read complex schematics and blueprints to install and repair electrical systems.
Electrical commissioning Supervisor
Samsung E&A
1 2024 - Current
- Commissioning And Energization Of UPS,DC Charger And Discharging Of Battery And Load Test
- Switch Gear 11kv 3.3kv, Mcc 415v, Maintenance, Function test& operation
- Inspection For Installation of Marshaling Panel, Junction Box, Switch Gear, UPS Panel, Linting Fixtures, Motors.VSD Insulation Resistance Test (IR) and Continuity cable test
- Inspection Electrical Equipment Commissioning/Function Test/Energize Gas Generator and Diesel Generator Function test direction on line (DOL), LV VSD, MV VSD Motor Solo Run
- Supported mechanical run test (MRT) Supported Dry Function Test (DFT) Interface function test between switch gear MV, LV and DCS,ELICs system.
- Fostered strong relationships with clients, vendors, and internal stakeholders, promoting a collaborative atmosphere that drove successful project outcomes.
- Executed installation and commissioning projects for electrical distribution and controls and automation systems.
- Reduced downtime on projects by efficiently troubleshooting electrical issues and providing timely solutions.
- Coordinated field testing of electrical equipment to validate performance parameters prior to final acceptance by clients.
- Developed comprehensive commissioning plans to ensure the smooth functioning of electrical systems before project handover.
- Collaborated closely with vendors and suppliers to ensure timely procurement of essential materials, avoiding costly delays in project timelines.
EIT Inspector
Equinor
02.2022 - 11.2023
- Material equipment incoming inspection
- Fit-up, Visual inspection and review dimension control report for EIT Witness and spot review report for EIT testing as cable test and power energize for the lighting
- Monitoring assemblies, activity and quality control activity at work field are compliance with ITP of quality requirement to specification and standards
- Expedite and supervise construction progress and quality to achieved target
- Witness termination cable for installation Ex glanding
- Final inspection G03 from construction to commissioning.
- Identified repair and upgrade requirements needed to meet safety and quality standards.
- Identified potential hazards and recommended corrective actions, ensuring a safer work environment for all employees.
- Prepared reports detailing findings of inspections, investigations, and tests.
Electrical Engineer
Toshiba Plant and services Corporation (TPSC)
08.2021 - 02.2022
- Provided technical support to colleagues on complex issues, assisting them in finding efficient solutions to problems.
- Evaluated electrical installations and systems to isolate faults and implement corrective actions.
- Inspected completed installations to observe operations and verify conformance to design and equipment specifications.
- Successfully managed multiple projects simultaneously by setting clear goals, prioritizing tasks, and monitoring progress.
- Improved electrical system efficiency by designing and implementing advanced power distribution networks.
- Proposed electrical product and system modifications to improve quality and efficiency.
SRE.Electrical Commissioning
Equinor
05.2020 - 04.2021
- Commissioning and Energization of UPS for Operation system
- Function test Switch board for ACB ,Relay ,Mcontrol Function test Startor and Feeder Insulation Resistance Test (IR) and Continuity cable test
- Inspection for equipment of electrical and Mechanical installed
- Function test communication controller with SAS
- Inspection MC and RFCC
- Responsibility for operation of system 82 & 84 (Emergency & Normal SWB) Support routine activity energize power for MOV,Lighting,Small Power,etc
- Provided device testing for monitoring progress, and recording defects.
- Developed organizational processes, job results and accurate forecasts necessary to reach projected milestones.
- Worked closely with operations and maintenance staff during the transition from commissioning to production, ensuring a smooth handover of systems.
- Saved resources by identifying and rectifying design issues prior to installation, preventing costly rework.
- Conducted factory acceptance tests to validate equipment functionality before shipment to site locations.
Electrical commissioning Supervisor
Samsung Corporation and Trading.
06.2015 - 12.2017
- Commissioning And Energization Of UPS,DC Charger And Discharging Of Battery And Load Test
- Switch Gear 22kv ,6.6kv, Mcc 400v, Maintenance ,Function test& operation
- Loading Arm Gangway system
- Inspection For Installation of Marshaling Panel, Junction Box, Switch Gear, UPS Panel, Battery Bank, Linting Fixtures, Motors
- Insulation Resistance Test (IR) and Continuity cable test
- Inspection Electrical and Instrument Equipment Commissioning/Function Test/Energize Gas Generator and Diesel Generator Motor Solo Run
- Inspection Test Report(ITR) Of Package
- Electrical Equipment Ex Inspection Test Reports
- Interface function test between switch gear MV, LV and DCS system
- Cable loop check
- SAT & RFI.
- Executed installation and commissioning projects for electrical distribution and controls and automation systems.
- Fostered strong relationships with clients, vendors, and internal stakeholders, promoting a collaborative atmosphere that drove successful project outcomes.
- Reduced downtime on projects by efficiently troubleshooting electrical issues and providing timely solutions.
- Contributed to the development of company-wide commissioning procedures, setting a new benchmark for project excellence.
- Developed comprehensive commissioning plans to ensure the smooth functioning of electrical systems before project handover.
- Enhanced safety compliance with the implementation of rigorous inspection protocols for all electrical systems.
- Conducted comprehensive risk assessments to identify potential hazards and implement appropriate mitigation strategies, ensuring a safe working environment for all team members.
- Scheduled and oversaw maintenance, repair and installation activities.
Electrical commissioning Engineer
Grand Work (Thailand)
04.2014 - 12.2014
- Commissioning and Energization of UPS for Operation system
- Function test for starter of AHU and FCU Panel
- Insulation Resistance Test (IR) and Continuity cable test
- Inspection for equipment of electrical and Mechanical installed
- Function Test of AHU and FCU with BMS for communication controller
- Inspection Test Report (ITR) Of Package
- Electrical Equipment Inspection Test Reports
- Cable loop check
- SAT & RFI.
- Provided device testing for monitoring progress, and recording defects.
- Developed organizational processes, job results and accurate forecasts necessary to reach projected milestones.
- Ran support tests, made adjustments and performed mechanical and electrical repairs.
- Conducted factory acceptance tests to validate equipment functionality before shipment to site locations.
- Analyzed, troubleshooting software problems and communicated possible solutions with development team.
- Managed escalations from direct reports during testing and commissioning phase of project.
- Liaised with vendors to resolve equipment-related issues promptly, minimizing downtime during commissioning phases.
- Optimized system performance through thorough testing and verification of installed systems.
- Confirmed testing software met future system requirements.
- Implemented quality control measures during installation, reducing rework requirements and improving overall system reliability.
Electrical Supervisor
Worley Parsons.,LTD
02.2014 - 04.2014
- Maintenance Substation
- 115KV 11KV 3.3KV LV400 Volt
- Switch Gear (SWGR)
- Trans former HV , MV , LV Operation for Activities Electrical system
- UPS and DC Charger
- Emergency Diesel Generator
- De-Saltor
- Coordinated electrical system maintenance and repair with other departments, outside agencies and public utilities.
- Resolved technical issues swiftly, applying troubleshooting expertise for minimal disruption to ongoing operations.
- Implemented preventive maintenance programs that increased equipment life expectancy and reduced repair expenses over time.
- Reley and Transducer.
- Administered disciplinary actions to workers violating safety regulations and company policies.
- Communicated with stakeholders on job milestones.
- Monitored job progress and performance of employees or contractors to complete projects prior to deadlines.
- Directed projects according to schedule and quality demands.
- Investigated and reported on accidents, injuries and near-miss incidents.
Electrical Commissioning Supervisor
Electricity Generating Public, Co.LTD (Egco)
09.2012 - 09.2013
- Maintenance Substation
- 115KV, 6.9KV LV400 Volt
- Switch Gear (SWGR)
- Trans former HV , MV , LV Operation for Activitie Electrical system
- UPS and DC Charger
- Emergency Diesel Generator
- Reley and Transducer
- Lighting System Fire Alarm System CCTV and Communication System.
- Conducted thorough training sessions for team members on relevant industry standards and safety regulations, fostering a culture of continuous learning and development.
- Coordinated field testing of electrical equipment to validate performance parameters prior to final acceptance by clients.
- Fostered strong relationships with clients, vendors, and internal stakeholders, promoting a collaborative atmosphere that drove successful project outcomes.
- Developed comprehensive commissioning plans to ensure the smooth functioning of electrical systems before project handover.
- Executed installation and commissioning projects for electrical distribution and controls and automation systems.
- Contributed to the development of company-wide commissioning procedures, setting a new benchmark for project excellence.
- Reviewed site status reports, modified schedules and plans and communicated changes to customer when necessary.
- Established effective preventive maintenance programs, minimizing equipment failure rates and extending system life spans.
- Coordinated efforts between mechanical, electrical, plumbing and structural disciplines and fostered team collaboration to achieve project goals.
- Optimized resource allocation by closely monitoring team progress and making necessary adjustments as needed.
- Streamlined communication between stakeholders, ensuring seamless coordination of project tasks and milestones.
- Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
- Evaluated final results to determine quality levels and isolate root causes of any identified faults.
- Efficiently assisted service workers with problematic transactions to maintain customer satisfaction and quickly rectify issues.
Electrical Engineer
Doosan Heavy Industries Co.,Ltd.
07.2011 - 04.2012
- Maintenance Substation
- 230KV 11KV LV400 Volt
- Switch Gear (SWGR)
- Trans former HV , MV , LV Operation for Activitie Electrical system
- UPS and DC Charger
- Emergency Diesel Generator
- Reley and Transducer
- Sumersible Pump & level check
- Performed maintenance procedures and repairs on existing electrical products and systems.
- Provided technical support to colleagues on complex issues, assisting them in finding efficient solutions to problems.
- Evaluated electrical installations and systems to isolate faults and implement corrective actions.
- Calibrated and repaired existing systems to maintain functionality.
- Successfully managed multiple projects simultaneously by setting clear goals, prioritizing tasks, and monitoring progress.
- Improved electrical system efficiency by designing and implementing advanced power distribution networks.
- Proposed electrical product and system modifications to improve quality and efficiency.
- Inspected and performed validation testing for designed systems and third-party installations.
- Developed comprehensive documentation for designs, including schematics, calculations, specifications, and reports for review by clients or regulatory agencies.
- Conducted detailed electrical system analyses to identify and rectify inefficiencies, ensuring optimal performance.
- Implemented best practices in electrical design documentation, improving clarity and cross-team collaboration.
Chargehand Electrical
Danieli Contruction International
05.2010 - 02.2011
- Supervise installation for Conduit, Cable Tray, Cable Ladder
- Supervise Cable Pulling and Cable Termination Of LV
- Service and Maintenance Electric Equipment.
- Self-motivated, with a strong sense of personal responsibility.
- Skilled at working independently and collaboratively in a team environment.
- Proven ability to learn quickly and adapt to new situations.
- Worked well in a team setting, providing support and guidance.
- Passionate about learning and committed to continual improvement.
- Worked effectively in fast-paced environments.
- Assisted with day-to-day operations, working efficiently and productively with all team members.
- Learned and adapted quickly to new technology and software applications.
Senior Electrical Commissioning
SPIE Oil & Gas
04.2009 - 04.2010
- Operation for Activitie processing Commissioning switch gear 6.9 KV LV400 Volt
- Switch Gear (SWGR)
- Trans former MV , LV Operation for Activities Electrical system
- UPS and DC Charger
- Emergency Diesel Generator
- Relay and Transducer.
- Optimized performance of electrical systems by conducting comprehensive commissioning tests.
- Assisted clients in understanding complex electrical concepts, enabling informed decision-making throughout the project lifecycle.
- Reduced downtime by quickly identifying and resolving issues with power distribution systems.
- Mentored new technicians in commissioning procedures, fostering a culture of knowledge sharing and continuous improvement within the team.
- Provided expert technical support during project planning phases, contributing valuable insights for optimal system design.
- Promoted workplace safety by consistently adhering to company policies and regulatory guidelines throughout all tasks performed.
- Contributed to cost-saving initiatives by identifying opportunities for increased energy efficiency in electrical systems design and implementation.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Conferred with engineers and designers to investigate and solve failure issues.
- Calculated amounts for designing and testing electrical systems and supplied finished costs to customers.
- Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
- Analyzed interruption reports and outage databases to identify outage trends and determine needed coordination changes.
- Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
Charge hand Electrical
Danieli Contruction International
04.2009 - 04.2010
- Supervise installation for Conduit, Cable Tray, Cable Ladder
- Supervise Cable Pulling and Cable Termination for DB,SWB
- Improved team productivity by effectively communicating with coworkers and supervisors on project requirements.
- Operated equipment while observing standard safety procedures.
- Verified quantity and description of materials received by checking merchandise against packing list.
Education
Bachelor of Engineering - Electrical Engineering
Pathumwan Intitute of Technology
Bangkok, Thailand 04.2001 -
Bachelor of Science - Electricity Industrial
RAJABHAT RAJANAGARINDRA UNIVERSITY.
Chachoengsao 04.2001 -
Diploma Cirtificate - Electrical Power
Phitsanulok Technical College
Phitsanulok, Thailand 04.2001 -
Skills
Electrical diagrams
Languagesknown
Thai & English
Personal Information
- Date of Birth: 05/25/82
- Nationality: Thailand
- Marital Status: Married
Certification
Basic Power Generation Training
Software
STID
Echo
Systems, Applications and Products in Data Processing (SAP)
Timeline
EIT Inspector
Equinor
02.2022 - 11.2023
Electrical Engineer
Toshiba Plant and services Corporation (TPSC)
08.2021 - 02.2022
SRE.Electrical Commissioning
Equinor
05.2020 - 04.2021
Electrical commissioning Supervisor
Samsung Corporation and Trading.
06.2015 - 12.2017
Electrical commissioning Engineer
Grand Work (Thailand)
04.2014 - 12.2014
Electrical Supervisor
Worley Parsons.,LTD
02.2014 - 04.2014
Electrical Commissioning Supervisor
Electricity Generating Public, Co.LTD (Egco)
09.2012 - 09.2013
Electrical Engineer
Doosan Heavy Industries Co.,Ltd.
07.2011 - 04.2012
Electrical
Danieli Contruction International
05.2010 - 02.2011
Chargehand Electrical
Danieli Contruction International
05.2010 - 02.2011
Senior Electrical Commissioning
SPIE Oil & Gas
04.2009 - 04.2010
Charge hand Electrical
Danieli Contruction International
04.2009 - 04.2010
Bachelor of Engineering - Electrical Engineering
Pathumwan Intitute of Technology
04.2001 -
Bachelor of Science - Electricity Industrial
RAJABHAT RAJANAGARINDRA UNIVERSITY.
04.2001 -
Diploma Cirtificate - Electrical Power
Phitsanulok Technical College
04.2001 -
Electrical commissioning Supervisor
Samsung E&A
1 2024 - Current
Similar Profiles
ANSHUMAN MOHANTYANSHUMAN MOHANTY
Assistant General Manager, Automation at Danieli Corus India Pvt. Ltd.Assistant General Manager, Automation at Danieli Corus India Pvt. Ltd.
Martin FortinMartin Fortin
Regional Sales Manager Mexico, C.A And Caribbean at DANIELI Centro RecyclingRegional Sales Manager Mexico, C.A And Caribbean at DANIELI Centro Recycling
Mohamed SewaifMohamed Sewaif
Project Manager at Danieli Officine Meccaniche S.P.AProject Manager at Danieli Officine Meccaniche S.P.A