Songthum Srisangkhom

• Managing the development and implementation of the QMS for inspection, documentation, and operational activities, including:
• Coordination: Facilitate seamless communication between Shop construction team, Site Construction team, Facility team, and subcontractor team to ensure project alignment.
• Quality Monitoring: Overseeing and auditing processes to maintain high standards of quality, adhering to ISO9001:2015 Certifications, Customer Project Specification requirements.
• Quality Control Planning: Develop and implement quality control inspection plans and procedures in line with project specifications.
• Verifying that subcontractor quality requirements are specified to vendors and included in contractor documentation submittals.
• Identifying and developing certification requirements for QA/QC personnel, along with continuing education and training needs.
• Documentation Review: Evaluate and approve quality-related documents and procedures, including Inspection Test Plan (ITP), Welding Procedure Specifications (WPS) and Welder Qualification Tests (WQT), etc.
• Regulatory Compliance: Ensure all products meet legislative requirements and quality assurance codes, such as ISO9001:2015, Customer Project specification, and International Standard.
• Subcontractor Development: Identify and implement strategies to enhance subcontractor performance and experience.
• Meetings: Regularly convene with subcontractors' quality departments and customer inspection teams to review progress and address concern.
• Reporting: Prepare and present reports to Assist Managing Director, detailing performance metrics and quality management outcomes.
• Team Leadership: Manage the QC team, providing leadership, mentorship, and direction to subcontractor QC personnel.
• Inspection Oversight: Supervise all visual inspections, documentation, and non-destructive testing (NDT), including coordination with third-party subcontractors.

Assisted in the development and implementation of the Construction Surveillance Program (CSP) for the ExxonMobil Integrated Team, where I:

• Monitored and audited processes before, during, and after activities.
• Ensured that fabricated items complied with legislation and quality assurance codes.
• Identified recommendations for improvements to contractors and subcontractors.
• Prepared and implemented the CSP for audits, documentation, and procedures in accordance with project specifications, including:
  a) Providing reports and feedback directly to the Lead Quality Assurance at ExxonMobil Integrated Team on performance and construction surveillance reports for the fabrication shop and assembly yard.
  b) Planning duties within the CSP team and managing related work schedules.
  c) Identifying and developing personnel qualification requirements and addressing continuing education/training needs.
  d) Providing leadership, mentorship, and direction to all personnel on the project.
  e) Holding regular scheduled meetings with subcontractors' Quality Departments to review outstanding items and upcoming activities.
  f) Following up on closing out issues in a timely manner.

• Managing the development and implementation of the QMS for inspection, documentation, and operational activities, including:
• Coordination: Facilitate seamless communication between construction, operations, and contractor teams to ensure project alignment.
• Quality Monitoring: Overseeing and auditing processes to maintain high standards of quality, adhering to ISO9001:2015, ISO45001:2018, ASME S Stamp, and NBIC R Stamp certifications.
• Quality Control Planning: Develop and implement quality control inspection plans and procedures in line with project specifications.
• Verifying that subcontractor quality requirements are specified to vendors and included in contractor documentation submittals.
• Identifying and developing certification requirements for QA/QC personnel, along with continuing education and training needs.
• Documentation Review: Evaluate and approve quality-related documents and procedures, including Inspection Test Plan (ITP), Welding Procedure Specifications (WPS) and Welder Qualification Tests (WQT), etc.
• Regulatory Compliance: Ensure all products meet legislative requirements and quality assurance codes, such as ISO9001:2015, ASME S and R stamps certificates.
• Subcontractor Development: Identify and implement strategies to enhance subcontractor performance and experience.
• Meetings: Regularly convene with subcontractors' quality departments and customer inspection teams to review progress and address concern.
• Reporting: Prepare and present reports to Managing Director, detailing performance metrics and quality management outcomes.
• Team Leadership: Manage the QA/QC team, providing leadership, mentorship, and direction to subcontractor QA/QC personnel.
• Inspection Oversight: Supervise all visual inspections, documentation, and non-destructive testing (NDT), including coordination with third-party subcontractors.

• Duties included coordination between Construction, Operations, and Contractors.
• Coordination: Facilitate seamless communication between construction, operations, and contractor teams to ensure project alignment.
• Monitoring and auditing of processes to ensure high standards of quality.
• Review and approve documentation and procedure; relating to QAQC such as WPS, WQT, etc.
• Ensuring products comply with legislation and quality assurance codes.
• Identify recommendations to improve subcontractor experience.
• Awareness of regulatory requirements and customer service expectations.
• Preparation and Implementation of Quality Control Inspection and procedures as per project Specifications.
• Managing the development and implementation of the QMS for inspection, documentation, and operations activities including:
• Planning duties within the QA/QC staff and related work schedules.
• Providing leadership, mentorship, and direction of subcontractor QA/QC personnel.
• Taking full responsibility for hold-point releases once all QMS functions have been complete and the equipment is ready to go into the next work stage.
• Oversee supervision subcontractors of all visual inspections, documentation, and NDE, including 3rd party subcontractors.
• Reviewing the inspection and testing methods and procedures for Radiographic, Dye Penetrant, Magnetic Particle, and Ultrasonic inspections.
• Managing inspection, NDE, and testing plans for Fabrication, repair work, and alterations.
• Preparing of internal non-conformance report identified during Fabrication and ensuring non-conforming products are identified and placed on restriction.
• Provide reports and feedback to Site quality managers on performance and Quality Management reports for fabrication manufacturing & assembly.
• Coordinate all QA/QC activities with the site QC manager.
• Hold regularly scheduled meetings with Customers and Coordination with the Customer Inspection Department.
• Leader and managing subcontractor to comply and review project documentation turnover packages from the subcontractor for the completed project (MDR).

• Duties performed include:
• Monitoring and maintaining quality and compliance targets.
• Monitoring and auditing of processes to ensure high standards of quality.
• Ensuring products comply with legislation and quality assurance codes.
• Identify recommendations to improve subcontractor experience.
• Being aware of regulatory requirements and customer service expectations.
• Overseeing the punch-listing program for system turnovers and participating in expediting the completion of the remaining work.
• Preparing and implementing Quality Control Inspection procedures as per project specifications, regulations, equipment-specific specifications, and QMS requirements.
• Managing the development and implementation of the QMS for planning, fabrication, inspection, documentation, and operations activities, including:
• Planning duties within the QA/QC staff and related work schedules.
• Identifying and developing QA/QC personnel certification requirements and continuing education/training needs.
• Providing leadership, mentorship, and direction of all QA/QC personnel.
• Taking full responsibility for hold-point releases once all QMS functions have been complete and the equipment is ready to go into the next work stage.
• Overseeing supervision of all visual inspections, documentation, and NDE, including 3rd party subcontractors.
• Managing inspection, NDE, and testing plans for Fabrication, repair work, and alterations.
• Preparing internal non-conformance report identified during fabrication and ensuring non-conforming products are identified and placed on restriction.
• Providing reports and feedback to project managers on performance and Quality Management reports for fabrication manufacturing, and assembly.
• Holding regularly scheduled meetings with the sub-contractors Quality Department to review outstanding items, and upcoming activities.
• Attending meetings with customers and coordination with the Customer Inspection Department.
• Leading and managing the team to review and comply with project documentation turnover packages from the contractor for the completed project (MDR).

• On-site Duration and Duties for Coordinating Between Construction Operations and Contractors:
• Ensuring effective communication of the system turnover logic to construction, operations, and contractors.
• Coordinating walk-downs of various areas and startup systems to identify any remaining work.
• Providing reports and feedback to plan managers on performance and quality management reports of contractor fabrication, manufacturing, and assembly.
• Overseeing the punch-listing program for shutdown turnovers system and expediting the completion of remaining work, ensuring all applicable documentation and inspection forms are completed, compiled, and presented for system turnover before plan startup.
• Ensuring that quality records, acceptance certificates, mechanical completion certificates, and documentation for specific systems and buildings/areas are prepared and collated in according to project requirements.
• Coordinating with the planning and scheduling department to ensure milestone dates are understood for each turnover in the area.
• Coordinating with the contractor site QC manager for the completion of as-built turnover documentation.
• Resolving any discrepancies between completed milestones and quality documentation.
• Reviewing suppliers’ inspection and test plans against the milestone scope of work.
• Coordinating with the commissioning department to define the scope of work.
• Assisting the site contractors in compiling turnover dossiers.
• Providing progress information for inclusion in shutdown meeting reports.
• Monitoring hydrostatic test packs for incorporation into as-built dossiers.
• Considering the implications of delays in QC as-built turnover documentation and notifying to the shutdown lead manager.
• Monitoring and controlling the status of punch lists and exception lists relevant to quality dossiers.
• Coordinating any inconsistencies in test packages with the contractor field QC site inspectors.

On-site Duration, I have to implement Duties for monitoring and maintaining quality and compliance targets.

• Monitoring and auditing of processes to ensure high standards.
• Ensuring products comply with legislation and quality assurance codes.
• Review and approve documentation and procedure; relating to QAQC such as ITP, WPS, WQT, MDR, etc.
• Providing reports and feedback to project managers on performance and quality management for fabrication manufacturing and assembly.
• Identifying recommendations to improve the customer experience.
• Ensuring compliance with regulations, equipment-specific specifications, and QMS requirements.
• Preparing internal non-conformance report identified during fabrication and ensuring non-conforming products are identified and restricted.
• Responsible for reviewing and updating program quality plans.
• Maintaining awareness of regulatory requirements and customer service expectations.
• Ensuring that activities outlined in the quality plan are executed.
• Taking full responsibility for hold-point releases once all QMS functions are complete, and the equipment is ready for the next work stage.
• Overseeing supervision of all visual inspections, documentation, and NDE, including 3rd party subcontractors.
• Managing inspection, NDE, and testing plans for fabrication, repair work, and alterations.
• Coordinating all quality related correspondence with the customers representatives.
• Holding regularly scheduled meetings with sub-contractor’s quality department to review outstanding items, and upcoming activities.
• Attending meetings with customers and coordination with the Customer Inspection Department.
• Overseeing the punch-listing program for system turnovers and expediting the completion of remaining work.
• Leading and managing team to review and comply with project documentation turnover packages from the contractor for the completed project (MDR).

On-site, I am responsible for overseeing quality control of structural steel fabrication, ensuring adherence to shop drawings and project specifications.

• Review and approve QA/QC-related documentation such as WPS/PQR, fit-up reports, dimension reports, NDT reports, welding traceability reports, etc., in accordance with Australian Criteria Standards.
• Supervise NDE crews performing MT and UT, and inspect/expedite all fabrication and bulk material procurement, including structural steel and plate work fabrication. Play a leading role in the company’s Quality Assurance/Quality Control process.
• Support the construction organization to ensure that all work performed meets the required project standards, ensuring effective communication.
• Coordinate with the Quality Assurance/Quality Control Coordinator to ensure that both shop and site teams are aware of any design or critical installation processes that may impact the operation or serviceability of procured equipment for the project.
• Oversee the punch-listing program for system turnovers and assist in expediting the completion of any remaining work.
• Lead and manage the team to ensure compliance and review project documentation turnover packages from the contractor for the completed project (MDR).

• Directly report to the QAQC Superintendent to oversee the ITP for structural steel and piping fabrication.
• Review and approve QAQC-related documentation, such as fit-up reports, dimension reports, NDT reports, welding traceability reports, etc., in accordance with Australian Criteria Standard.
• Oversee subcontractors' NDE crews performing MT, UT, and RT.
• Inspect and expedite all fabrication and bulk material procurement, including structural steel fabrication, plate work fabrication, and piping fabrication.
• Play a leading role in the company’s quality assurance/quality control process, supporting the construction organization to ensure all work performed meets the required project standards and facilitating communication.
• Check hydrostatic test packages for NDT compliance before testing.
• Advise site subcontractors on welding and testing.
• Coordinate with the Quality Assurance/Quality Control Coordinator to ensure both the shop and site are aware of any design or critical installation processes that may impact the operation or serviceability of equipment procured for the project.
• Oversee the punch-listing program for system turnovers and participate in expediting the completion of the remaining work.
• Lead and manage the team to ensure compliance with and review project documentation turnover packages from the contractor for the completed project (MDR).

The implementation station covers quality control of structural steel and piping fabrication, following the shop drawings and project specifications.

• Review and approve documentation and procedures related to QA/QC, such as ITP, WPS, WQT, MDR, etc.
• Inspect and expedite all tagged equipment, fabrication, and bulk materials procurement, including structural steel fabrication, piping fabrication, plate work fabrication, electrical items, cables, etc., procured in Thailand.
• Play a leading role in the company’s quality assurance/quality control process.
• Support the construction organization to ensure that all work performed meets the required project standards.
• Coordinate to ensure the site is aware of any design or critical installation processes that may impact the operation or serviceability of equipment procured for the project.
• Ensure quality records, acceptance certificates, mechanical completion certificates, and documentation for specific systems and buildings/areas are prepared and collated in accordance with project requirements.
• Resolve any discrepancies between completed milestones and quality documentation.
• Review suppliers' inspection and test plans against the milestone scope of work.
• Assist site subcontractors in compiling turnover dossiers.
• Provide progress information for incorporation into project reports.
• Monitor hydrostatic test packs for inclusion in as-built dossiers.
• Monitor and control the status of punch lists and exception lists relevant to quality dossiers.
• Coordinate any inconsistencies in test packages with the subcontractor field QC site inspectors.
• Check hydrostatic test packages for NDT compliance before testing.
• Advise site subcontractors on welding and testing.
• Provide progress data to the planning and scheduling department.
• Lead and manage the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: Directly report to ExxonMobil’s Quality Lead for structural steel/piping fabrication and installation.

• Carried out Construction Surveillance Program (CSP) audits.
• Verified rework and repair of non-conforming components.
• Reviewed the main contractor’s QA/QC program and personnel for project approval, and monitored the main contractor’s personnel for compliance with ExxonMobil’s procedures.
• Witnessed testing of all welders to ASME Sec IX and AWS D1.1 for all processes.
• Reviewed and approved WPS & PQR.
• Oversaw NDE crews performing PT, MT, RT, and phased array inspections.
• Reviewed and approved construction completion packages for hydrostatic and pneumatic tests; performed walk-downs.
• Recorded and listed defective welds.
• Witnessed and approved hydrostatic test packages for NDT compliance with project specification requirements before testing.
• Advised site subcontractors regarding welding and testing.
• Supported the construction organization to ensure all work performed met the required project standards.

On-site Duration: Directly report to ExxonMobil’s Quality Lead for structural steel/piping fabrication and installation.

• Carried out Construction Surveillance Program (CSP) audits.
• Verified rework and repair of non-conforming components.
• Reviewed the main contractor’s QA/QC program and personnel for project approval, and monitored the main contractor’s personnel for compliance with ExxonMobil’s procedures.
• Witnessed testing of all welders to ASME Sec IX and AWS D1.1 for all processes.
• Reviewed and approved WPS & PQR.
• Oversaw NDE crews performing PT, MT, RT, and phased array inspections.
• Reviewed and approved construction completion packages for hydrostatic and pneumatic tests; performed walk-downs.
• Recorded and listed defective welds.
• Witnessed and approved hydrostatic test packages for NDT compliance with project specification requirements before testing.
• Advised site subcontractors regarding welding and testing.
• Supported the construction organization to ensure all work performed met the required project standards.
• Conducted line checks, punch listing, and assembled mechanical completion packages for completed facilities.
• Spot-checked and confirmed the main contractor’s installation of pipe spools for modifications and tie-ins to existing facilities.
• Led and managed the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

• Oversee and witness structural steel/piping fabrication and installation.
• Verify rework and repair of non-conforming components.
• Review the contractor’s QA/QC program and personnel for project approval, and monitor contractor personnel for compliance with Worley Parsons’ procedures.
• Test all welders to ASME Sec IX and AWS D1.1 using multiple welding processes.
• Record and list defective welds.
• Oversee subcontractor NDE crews performing PT, MT, and RT.
• Monitor and control the status of punch lists and exception lists related to quality dossiers.
• Coordinate any inconsistencies in test packages with the subcontractor field QC site inspectors.
• Review and approve construction completion packages for hydrostatic and pneumatic tests; perform walk-downs.
• Line check, punch list, and assemble mechanical completion packages for completed facilities.
• Oversee installation of pipe spools for modifications and tie-ins to existing facilities.
• Lead and manage the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing structural steel fabrication.

• Reviewing the QA/QC program and personnel for project approval and visual inspections.
• Inspecting and supervising NDE crews performing PT and MT.
• Ensuring the contractor adheres to the correct approved procedure specifications.
• Reviewing and approving WPS & PQR.
• Setting up a database to control QA/QC welding systems.
• Reviewing and approving NDE reports and NDE packages for completed facilities.
• Checking hydrostatic test packages for NDT compliance before testing.
• Advising site subcontractors regarding welding and testing.
• Coordinating with the client for project completion and quality control, ensuring compliance with project specifications.
• Coordinating with field subcontractors and the third-party NDT inspection company.

• Oversee subcontractors for structural steel/piping fabrication and installation.
• Controlled and monitored subcontractors performing additional testing of piping work, addressing a significant backlog (4,300 joints) at the Sriracha Piping Shop, which was delaying the project.
• Analyzed subcontractor databases to ensure compliance with random radiography in accordance with ASME B31.3.
• Reviewed the QA/QC program and personnel for project approval and visual inspections.
• Inspected and supervised NDE crews performing PT, MT, and RT.
• Ensured all contractors adhered to the correct approved procedure specifications.
• Set up a database to control QA/QC welding systems.
• Coordinated with field subcontractors and the third-party NDT inspection company.
• Witnessed welder qualification testing and procedure qualification testing.
• Witnessed any remedial repair welding.
• Reviewed welding summary reports.
• Checked hydrostatic test packages for NDT compliance before testing.
• Advised site subcontractors regarding welding and testing.
• Recorded and listed defective welds.
• Led and managed the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the structural steel/piping fabrication and installation.

• Reviewing the QA/QC program and personnel for project approval and testing all welders to ASME Sec IX and AWS D1.1 using multiple welding processes.
• Supervising NDE crews performing PT, MT, and RT.
• Reviewing and approving WPS & PQR.
• Reviewing documents and approving construction punch lists, and assembling mechanical completion packages for completed facilities, including installations for modifications and tie-ins to existing facilities.
• Providing complete as-built drawings of all completed installations.
• Maintaining all records of inspections and qualified welders.
• Verifying rework and repair of non-conforming components and assembling turnover packages for the client.
• Leading and managing the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the structural steel/piping fabrication and installation.

• Verifying rework and repair of non-conforming components.
• Reviewing the contractor’s QA/QC program and personnel for project approval and monitoring compliance with TET's procedures.
• Testing all welders to ASME Sec IX and AWS D1.1 using multiple welding processes while supervising NDE crews performing (PT, MT, and RT).
• Reviewing documents and approving construction completion packages for hydrostatic and pneumatic tests, including walk-downs and punch listing.
• Assembling mechanical completion packages for completed facilities.
• Verifying pump, motor, and compressor alignments.
• Overseeing installations for modifications and tie-ins to existing facilities.
• Leading and managing the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the structural steel fabrication.

• Reviewing the QA/QC program and personnel for project approval and visuals.
• Inspecting and supervising NDE crews performing (PT, MT, and RT).
• Ensuring all contractors adhere to the correct approved procedure specifications.
• Setting up a database to control QA/QC welding systems.
• Witnessing welder qualification testing and procedure qualification testing.
• Witnessing any remedial repair welding.
• Reviewing the welding summary reports.
• Reviewing documents and approving NDE reports and NDE packages for completed facilities.
• Verifying rework and repair of non-conforming components and assembling turnover packages for the client.
• Leading and managing the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the structural steel/piping fabrication and installation.

• Implementing the water treatment plant installation, which includes piping, lamella clarifier, flocculation, coagulation, continuous filter (Dynasand), inclined plate sedimentation, pre- and post-chlorination, multimedia filter, and reverse osmosis (RO).
• The implementation station covers cost control, time control (schedule), and quality control, following the shop drawings. This includes civil work such as inspecting all foundations and slabs before the installation of equipment and mechanical work, including grid line and elevation checks before pouring lean concrete, and inspecting all formwork, rebar, and pile deviations before pouring the concrete.
• Mechanical and equipment work includes the installation of tanks, pressure vessels, pumps, accessories, air compressor units, air dryer units, chemical pumps, and accessories, all in accordance with project specifications and standard procedures.
• Electrical work and control systems (SCADA) include cable ladder installation, wiring, and connecting cables on the cable ladder, as well as MCC, MDB, PLC, switchgear, and transformer panel layout design, with installation following the designed layout.
• Designing and installing the lighting system.
• Designing and installing instruments and measurement systems.
• Confirming control wiring and connections.
• Providing insulation and continuity reports for instruments.
• Confirming motor rotation and conducting no-load tests for motors.
• Performing loop and sequence tests in accordance with project specifications and standard procedures.
• Leading and managing the team to ensure compliance with and review of project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the structural steel/piping fabrication and installation.

• Implementing the water treatment plant installation, including piping, lamella clarifier, flocculation, continuous filter (Dynasand), activated carbon filter, water softener, activated carbon filter for deionized (DI) water, cation and anion exchangers, and mixed bed exchangers.
• The implementation station covers cost control, time control (schedule), and quality control, which follow the shop drawings, including mechanical and equipment work such as tank and pressure vessel installation, pumps and accessories, air compressor units, air dryer units, chemical pumps, and accessories, all in accordance with project specifications and standard procedures.
• Electrical work and control systems (SCADA), including cable ladder installation, wiring, and connecting cables on the cable ladder, as well as the layout design and installation of MCC, MDB, PLC, switchgear, and transformer panels, following the designed layout.
• Designing and installing the lighting system.
• Designing and installing instruments and measurement systems.
• Confirming control wiring and connections.
• Providing insulation and continuity reports for instruments.
• Confirming motor rotation and conducting no-load tests for motors.
• Performing loop and sequence tests in accordance with project specifications and standard procedures (automatic system testing).
• Leading and managing the team to ensure compliance with and review project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the structural steel/piping fabrication and installation.

• Implementing the water treatment plant installation, including piping, lamella clarifier, flocculation, continuous filter (Dynasand), activated carbon filter, water softener, activated carbon filter for deionized (DI) water, cation and anion exchangers, and mixed bed exchangers.
• The implementation station covers cost control, time control (schedule), and quality control, which follows the shop drawings, including mechanical and equipment work such as tank and pressure vessel installation, pumps and accessories, air compressor units, air dryer units, chemical pumps, and accessories, all in accordance with project specifications and standard procedures.
• Electrical work and control systems (SCADA), including cable ladder installation, wiring, and connection of cables on the cable ladder, as well as the layout design and installation of MCC, MDB, PLC, switchgear, and transformer panels, following the designed layout.
• Designing and installing the lighting system.
• Designing and installing instruments and measurement systems.
• Confirming control wiring and connections.
• Providing insulation and continuity reports for instruments.
• Confirming motor rotation and conducting no-load tests for motors.
• Performing loop and sequence tests in accordance with project specifications and standard procedures (automatic system testing).
• Leading and managing the team to comply with and review project documentation turnover packages from the contractor for the completed project (MDR).

On-site Duration: I am responsible for implementing the fabrication and erection of all piping.

• The implementation station covers the project documents and inspection of completed piping work.
• Coordinating with the field subcontractors for all welding procedure specifications and procedures qualification reports.
• Reviewing the causes and effects of welding defects and taking remedial actions.
• Coordinating with the field subcontractors and the third-party NDT inspection company.
• Reviewing the radiographic film and all NDT reports on a daily basis.
• Reviewing the inspection and testing methods and procedures for radiographic, dye penetrant, magnetic particle, and ultrasonic inspections.
• Witnessing welder qualification testing and procedure qualification testing.
• Witnessing any remedial repair welding.
• Reviewing the welding summary reports.
• Conducting line checks and preparing test limit packages for hydro testing.
• Checking the hydrostatic test packages for NDT compliance before testing.
• Advising the site subcontractors regarding welding and testing.
• Monitoring any post-weld heat treatment on-site and reviewing the completed test reports.
• Selecting weld joints for nondestructive testing.
• Recording and listing defective welds.
• Monitoring the control and issuance of welding electrodes.
• Controlling the QC site welding inspectors.
• Ensuring compliance with all documentation and reviewing the project document turnover package for the completed project (MDR).

On-site Duration: I am responsible for implementing the fabrication and erection of all piping.

• The implementation station covers the project documents and inspection of completed piping work.
• Witnessing welder qualifications testing and procedure qualification testing.
• Witnessing any remedial repair welding.
• Reviewing the welding summary reports.
• Monitoring and controlling the status of punch lists and exception lists relevant to quality dossiers.
• Conducting line checks and preparing test limit packages for hydro testing.
• Checking the hydrostatic test packages for NDT compliance before testing.
• Advising the site subcontractors regarding welding and testing.
• Monitoring any post-weld heat treatment on-site and reviewing the completed test reports.
• Selecting weld joints for nondestructive testing.
• Coordinating any inconsistencies in test packages with the subcontractor's field QC site inspectors.
• Coordinating with the main contractor for the turnover package and system for ISO 9001 certified process piping work and quality control, following the shop drawings and project specifications.
• Ensuring compliance with all documentation and reviewing the project document turnover package for the completed project (MDR).

On-site Duration for the ITP Stage1-700 Mw Combined Cycle Power Plant (Package M-1), Thailand Aromatics Recovery Project. (Trap), Coco Pipeline Phase 3B Project, General Motor Project Contracts 3A (Fabrication Shop Nurn Kapork), 2nd Aircraft Maintenance Center Project II, 200 MW ALPHA POWER PLANT Project and Hydro Cracker Unit-2 (HCU-2) : I am responsible for implementing Piping Fabrication and Erection

• The implementation phase includes managing project documentation and inspecting completed piping work.
• Setting up a database to control QA/QC welding systems.
• Conducting line checks and preparing test limit packages for the hydro test.
• Verifying hydrostatic test packages for NDT compliance and completed before testing.
• Coordinating with the main contractor for the turnover package and ensuring that the system adheres to ISO 9001-certified process piping work and quality control, following the shop drawings and project specifications.
• Ensuring compliance with all documentation and reviewing the project document turnover package (MDR) for the completed project.